Cape Coral pressure washing guide
Cape Coral pressure washing prices, in plain numbers
Two kinds of numbers belong on this page: broad planning ranges for private work, written for this guide, and the City’s published water rates, which set what the water from your spigot costs.
Private-service ranges for early planning
These figures are illustrations to help set a budget. They are not a survey of Cape Coral contractors, an advertised price or a quote, and real quotes can land outside them. Size, height, roof type, access, stain type and the amount of water recovery all move the total.
| Job | Planning range |
|---|---|
| Single-story house, soft wash of the walls | $250–$450 |
| Two-story house, soft wash of the walls | $375–$650 |
| Shingle roof, soft wash | $350–$650 |
| Concrete or clay tile roof, soft wash | $450–$950 |
| Two-car concrete driveway | $125–$250 |
| Paver driveway, clean, re-sand and seal | $650–$1,500 |
| Pool cage screens and lanai deck | $225–$475 |
| Dock boards and seawall cap, no chemicals | $200–$550 |
| Gutter faces, one-story perimeter | $150–$350 |
Get a written quote before any work starts. Ask what surfaces, methods and products it covers, whether joint sand, sealing and gutter cleaning are included, and what would change the price once the crew is on site.
What the water costs from a City spigot
Most home washes run from the house spigot, so the water shows up on your utility bill. The City’s water, wastewater and irrigation rate schedule effective October 1, 2026 (retrieved September 27, 2026) lists these residential water charges:
| Monthly use | Charge per 1,000 gallons |
|---|---|
| 0–5,000 gallons | $5.44 |
| 5,001–10,000 gallons | $8.14 |
| 10,001–15,000 gallons | $10.86 |
| 15,001–20,000 gallons | $14.92 |
| 20,001 gallons and up | $19.00 |
The same schedule lists a non-residential water charge of $8.14 per thousand gallons for all gallons, a wastewater disposal commodity charge of $12.85 per thousand gallons, and a flat irrigation rate of $13.40 a month for single-family homes and duplexes. How those charges apply to a given account is for the City’s billing office to confirm.
A worked example, using a hypothetical machine rather than a measured one: a unit rated at 4 gallons a minute that runs for two hours uses 480 gallons. What that adds to the bill depends on the tier your household is already in that month. Ask the contractor for their machine’s flow rate if you want to estimate it.
Numbers that are rules, not prices
Some figures on this site describe rules rather than costs: the City’s 33-foot owl buffer during nesting, the September 30 expiry of business tax receipts, and the fertilizer pause from June 1 to September 30. The wash-water guide lists them with their sources, and none of them is a fee a homeowner pays for a wash.
Three questions that make quotes comparable
- Which surfaces, and which method and product for each?
- Where will the rinse water go, and is recovery included?
- What could raise the price on the day, and will you approve it first?
Before you decide
Questions worth asking
Is the house-wash range a promise for my home?
No. It is a broad illustration for planning. A contractor prices your actual walls, height, growth and access, and may quote outside the range.
Does the City charge for water used in a pressure wash?
Water from a City potable spigot is billed through your utility account at the published tiers. The City’s billing office can confirm how your account is charged.